What is the working principle of non-woven bag making machine?
Abstract：Non-woven bags are loved by many consumers. As the demand for non-woven bags has increased, many manufacturers choose to produce non-woven bags.
Non-woven bags are loved by many consumers. As the demand for non-woven bags has increased, many manufacturers choose to produce non-woven bags. Because the labor cost of manual sewing is too high, and the manual sewing is not made by the machine, and there will be frequent errors, so the non-woven bag making machine has appeared. What is the working principle of the non-woven bag making machine?
The working principle of the full active non-woven bag making machine is to use high frequency vibration from the welding head to transmit sound waves to the welding surface of the working object, instantly make the working object molecules conflict, reach the plastic melting point, and then complete the rapid dissolution of solid data, can be neatly welded to the textile, strong bonding force, non-woven fabric as the original data, full active production, easy to operate. The full active non-woven bag making machine is to send powder (colloidal or liquid) to the packaging machine by the feeder in real time. In the upper hopper, the introduction speed is controlled by the photoelectric positioning device, and the rolled sealing paper (or other packaging materials) is driven by the guide roller to the lapel shaper, which is bent and then bonded into a cylinder by the longitudinal sealer. The material is actively measured and filled into the made bag, and the transverse sealer pulls the bag barrel down intermittently when the heat seal is cut, so that the lap longitudinal seam three side seal is finally formed Mouth flat bag, complete the sealing of a bag.
The non-woven bag making mechanism does not use traditional stitching when making non-woven bags, but uses ultrasonic technology to weld, reducing the joint situation because of stitching. In addition, the non-woven bag making machine adopts advanced technology for processing, which will not harm the cloth in the process of processing, and problems such as raw edge and curling will occur.
The working principle of the full active non-woven bag making machine is to use high frequency vibration from the welding head to transmit sound waves to the welding surface of the working object, instantly make the working object molecules conflict, reach the plastic melting point, and then complete the rapid dissolution of solid data, can be neatly welded to the textile, strong bonding force, non-woven fabric as the original data, full active production, easy to operate. The full active non-woven bag making machine is to send powder (colloidal or liquid) to the packaging machine by the feeder in real time. In the upper hopper, the introduction speed is controlled by the photoelectric positioning device, and the rolled sealing paper (or other packaging materials) is driven by the guide roller to the lapel shaper, which is bent and then bonded into a cylinder by the longitudinal sealer. The material is actively measured and filled into the made bag, and the transverse sealer pulls the bag barrel down intermittently when the heat seal is cut, so that the lap longitudinal seam three side seal is finally formed Mouth flat bag, complete the sealing of a bag.
The non-woven bag making mechanism does not use traditional stitching when making non-woven bags, but uses ultrasonic technology to weld, reducing the joint situation because of stitching. In addition, the non-woven bag making machine adopts advanced technology for processing, which will not harm the cloth in the process of processing, and problems such as raw edge and curling will occur.
